EPOXY CP 190 - It is a two-component, solvent-free epoxy resin based, semi-gloss coating with high adhesion strength that can be used as an intermediate and final coat.
PRODUCT DESCRIPTION
EPOXY CP 190 - Two-component, solvent-free epoxy resin-based, semi-gloss coating with high adhesion strength, suitable for use as an intermediate and top coat.
PACKAGING
One bucket of EPOXY CP 195 Component A is net 16.00 kg. One gallon of EPOXY CP 195 Hardener Component B is net 4.00 kg.
SHELF LIFE
The product should be stored in its original packaging in a cool and dry place. The shelf life in unopened packaging is 12 months for both Component A and B.
HEALTH AND SAFETY INFORMATION
Please read the MSDS (Material Safety Data Sheet) for necessary safety precautions and warnings. Minimum safety precautions to be followed are listed below.
*The information provided about the products is based on our laboratory tests and research under normal conditions. Our company is not responsible for works carried out under unsuitable application conditions. We reserve the right to modify this information. For more detailed information, please contact.
EPOXY CP 190 - Two-component, solvent-free epoxy resin-based, semi-gloss coating with high adhesion strength, suitable for use as an intermediate and top coat. EPOXY CP 190 is used in factories, assembly workshops, warehouses, aircraft hangars, stores, parking lots, food facilities, water tanks, hospitals, chemical and pharmaceutical industries, power plants, hygiene-sensitive units, plaster-applied surfaces, and all industrial areas. It has high mechanical strength and abrasion resistance, is easy to clean, and offers excellent adhesion. Contains anti-corrosive pigments, making it suitable for a wide range of applications. It has excellent physical and chemical resistance. It can cure at low temperatures and is a high-performance product in terms of anticorrosive properties. It is suitable for use where fast recoating and drying times are desired.
| *TECHNICAL PROPERTIES | |
|---|---|
| Appearance | Semi-matte |
| Color | Transparent |
| Density (g/ml 20°C) | 1.40 ± 0.05 |
| Mixing Ratio (by weight) | Component A 8.00 units Component B 2.00 units |
| Solid Content (w/w) | 96 % ± 2 |
| Nozzle (inch) | 0.019 – 0.023" |
| Application Method | Airless Spray, Air Spray, Brush, Roller |
| Pot Life (20 °C) | 20 – 25 min |
| Full Cure (days/20 °C) | 4 – 6 days |
NOTE: Drying time increases as the application thickness increases.
| # | Touch Dry | Hard Dry | Minimum Interval Between Coats |
|---|---|---|---|
| -5 °C | 12 h | 29 – 30 h | 24 h |
| 0 °C | 9 h | 20 – 21 h | 18 h |
| 5 °C | 6 h | 13 – 14 h | 12 h |
| 15 °C | 120 – 160 min | 5 – 6 h | 3.5 h |
| 25 °C | 80 – 100 min | 3 – 4 h | 2 h |
| 35 °C | 60 – 80 min | 1.5 – 2 h | 1.5 h |
Surface Preparation
The application surface must be carefully cleaned of dirt, oil, and grease. Loose old paint (on previously painted surfaces) must be removed. Rust and burrs on the surface should be cleaned using a diamond-tipped machine according to SA 2 ½ standards. Application can be done with a brush, roller, or spray gun. When spraying, a mask must be worn. Particularly in small and enclosed areas, very good ventilation is required.
Product Usage
Before use, the components of EPOXY CP 190 must be mixed thoroughly and separately. Then, a homogeneous mixture is prepared with its specific hardener. On a surface previously primed with Solid Resin 360, apply 0.600 kg and sprinkle 0.500–1.000 g of chips. To prevent condensation, apply only to clean and dry surfaces above the dew point temperature. Paint temperature should be between 20–35°C. For very long spray hoses and paint temperatures below 15°C, thinning may be necessary. This may result in lower film thickness and longer drying time. Application can be done with a brush, roller, or spray gun. When spraying, a mask must be worn. Especially in small and enclosed areas, good ventilation must be ensured.
ENVIRONMENTAL CONDITIONS
Ambient temperature should be between +5°C and 35°C. Do not apply when relative humidity exceeds 80%. To prevent surface condensation, the surface temperature must be at least 3–5°C above the dew point. In windy conditions, consumption may increase. Surface temperature should be at least -5°C and at most 45°C.
Fill out the form to request pricing, application or technical information about this product.
Solid Epoxy Flooring Systems provides durable epoxy flooring products and coating solutions for garages, commercial spaces and industrial facilities.
Strong surfaces. Clean finishes. Long-lasting protection.
We will get back to you as soon as possible.