SOLID RESIN 380 UV is an Epoxy resin based, UV resistant top coat varnish.
PRODUCT DESCRIPTION
SOLID RESIN 380 UV is an Epoxy resin based, UV resistant top coat varnish.
ENVIRONMENTAL CONDITIONS
The ambient temperature should be between +15°C and 35°C. Application should not be made in cases where the relative humidity exceeds 80%. In order to avoid surface condensation, the surface temperature should be at least 3-5°C above the dew point.
It should be known that the consumption will increase in the application to be made at low temperatures. The surface temperature should be minimum +5°C and maximum 45°C high.
PACKAGING
A bucket SOLID RESIN 380 UV Component A is 13,14 kg’.
One gallon SOLID RESIN 380 UV Hardener B Component is 4.86 kg net.
SHELF LIFE
The material should be stored in a cool and dry place in its original packaging. Storage life of material in unopened packaging 12 months for A and B components.
HEALTH AND SAFETY INFORMATION
Read the MSDS form (Material Safety Data Sheet) for necessary safety rules and warnings. The minimum safety rules to be followed are as follows.
• The contact of the paint with the skin and eyes should be prevented by using gloves, protective glasses, face mask, and industrial cream.
• Adequate air circulation should be ensured during the application and until the paint dries.
• If the paint comes into contact with the skin, it should be washed with warm water and soap or an industrial cleaner. If it has splashed into the eyes, it should be rinsed with water for at least 10 minutes and medical attention should be sought.
• All warning notes on buckets should be read carefully and recommended working rules should be followed.
*Our information on products is normally based on our own laboratory experiments and research. Our company is not responsible for any work under inappropriate application conditions. The right to change this information is reserved by our company. For more detailed information, please apply.
SOLID RESIN 380 UV, It is a non-yellowing epoxy based top coat varnish.
SOLID RESIN 380 UV Usage Areas;
It is an epoxy-based top coat varnish that does not turn yellow when desired in ultraviolet coating by being applied on epoxy and similar coating types.
| *TECHNICAL SPECIFICATIONS | |
|---|---|
| View | Full glossy |
| Color | Transparent |
| Density (gr/ml 20ºC) | 1.07 ± 0.05 |
| Mix Ratio(Weightça) | A Comp. 7.50 units B Comp. 2.50 units |
| Weight Solids(w/w) | 98% ± 2 |
| Application Method | Trowel, Brush, Roller |
| Mixture Life (20ºC) | 20-25min. |
| Full Cure (days/20°C) | 4-10 days |
*DRYING INFORMATION (100 micron DFT)
| Touch Dry | Hard Dry | Waiting Times Between Levels (Minimum) | |
|---|---|---|---|
| -5°C | 12 hours | 29-30 hours | 24 hours |
| 0°C | 9 hours | 20-21 hours | 18 hours |
| 5°C | 6 hours | 13-14 hours | 12 hours |
| 15°C | 120-160 min. | 5-6 hours | 3.5 hours |
| 25°C | 80-100 min. | 3-4 hours | 2 hours |
| 35°C | 60-80 min. | 1.5-2 hours | 1.5 hours |
NOTE: As the application thickness increases, the drying time also increases.
| CONSUMPTION Wet Film Thickness (µ) | Dry Film Thickness (µ) | Theoretical Consumption ± 10 (gr/m²) |
|---|---|---|
| 225 | 220 | 240 |
NOTE: As the application thickness increases, the consumption also increases.
Surface Preparation
The drill surface is carefully cleaned of dirt, oil and grease. Loose old paint (on previously painted, surfaces) is removed. Surface rust and flaps, SA 2 ½ It is cleaned by diamond-tipped machine according to the norms. Masks should be used in exercises performed by spraying. Very good ventilation is required, especially in small, confined spaces.
Usage of the Product
Before using SOLID RESIN 380 UV, its components are thoroughly mixed separately. Then a homogeneous mixture is made with its own hardener. It is applied only to a dry and clean surface with a temperature above the spindle point to prevent condensation. The polish temperature should be 20-35°C. Thinning may be required for very long spray hoses and at temperatures below 15°C. This can lead to lower film thickness and longer drying times.
Application method; brush, roller or gun is done with. Masks should be used in applications made by spraying.
Fill out the form to request pricing, application or technical information about this product.
Solid Epoxy Flooring Systems provides durable epoxy flooring products and coating solutions for garages, commercial spaces and industrial facilities.
Strong surfaces. Clean finishes. Long-lasting protection.
We will get back to you as soon as possible.