PRODUCT DESCRIPTION

SOLID RESIN 100  It is an epoxy resin-based, solvent-free primer.

RAF ÖMRÜ

The material should be stored in a cool and dry place in its original packaging. Storage life of material in unopened packaging 12 months for A and B components.

ENVIRONMENTAL CONDITIONS

The ambient temperature should be between +15°C and 35°C. Application should not be made in cases where the relative humidity exceeds 80%. To avoid surface condensation, the surface temperature should be at least 3-5°C above the dew point.

It should be known that the consumption will increase in the application to be made at low temperatures. The surface temperature should be minimum +5°C and maximum 45°C high.

HEALTH AND SAFETY INFORMATION
Read the MSDS form (Material Safety Data Sheet) for necessary safety rules and warnings. The minimum safety rules to be followed are as follows.
•    Visible skin and eye contact should be prevented by using gloves, protective goggles, face mask, and industrial cream.
•    Adequate air circulation should be provided during the application and until the paint dries.
•   If the product comes into contact with the skin, it should be washed with warm water and soap or an industrial cleaner. If it has splashed into the eyes, it should be rinsed with water for at least 10 minutes and medical attention should be sought.
•    All warning notes on buckets should be read carefully and recommended working rules should be followed.

*Our information on products is normally based on our own laboratory experiments and research. Our company is not responsible for any work under inappropriate application conditions. The right to change this information is reserved by our company. For more detailed information your application.