SOLID ES 351 – Two component, solvent free epoxy resin based, conductive epoxy primer.
PRODUCT DESCRIPTION
SOLID ES 351 – Two component, solvent free epoxy resin based, conductive epoxy primer.
AMBIENT CONDITIONS
Ambient temperature should be between +15°C and 35°C. Application should not be made in cases where the relative humidity exceeds 80%. The surface temperature must be at least 3-5 °C above the dew point to avoid surface condensation.
It should be known that the consumption will increase in the application to be made at low temperatures. The surface temperature should be at least +5°C and maximum 45°C high.
PACKAGING
Total 20 kg in two-component kits.
A bucket of SOLID ES 351 Component A is 16 kg net.
A bucket of SOLID ES 351 Hardener B Component is 4 kg net.
SHELF LIFE
The material should be stored in a cool and dry place in its original packaging. The storage life of the material in the unopened package is 12 months for the A and B components.
HEALTH AND SAFETY INFORMATION
Read the MSDS form (Material Safety Data Sheet) for necessary safety rules and warnings. The minimum safety rules to be followed are as follows.
• The skin and eye contact of the product should be prevented by using gloves, safety glasses, face mask and industrial cream.
• Adequate air circulation must be provided during the application and until the paint dries.
• If the product comes into contact with the skin, it should be washed with warm water and soap or an industrial cleaner. If splashing occurs in the eyes, rinse with water for at least 10 minutes and seek medical attention.
• All warning notes on buckets should be read carefully and recommended operating rules should be followed.
*Our information about the products has been prepared, under normal conditions, based on our own laboratory experiments and research. Our company is not responsible for working under unsuitable application conditions. The right to change this information is reserved by our company. For more detailed information, your application.
SOLID ES 351, This flooring system provides excellent adhesion in all coating systems.
SOLID ES 351, usage areas;
It is used to create conductivity on the floor when priming epoxy reinforced concrete flooring or cement based screeds.
| *TECHNICAL SPECIFICATIONS | |
|---|---|
| View | Mat |
| Color | Black |
| Density (gr/ml 20ºC) | 1,40 ± 2 gr/cm³ |
| Mix Ratio(Weightça) | A Comp. 7.50 units B Comp. 2.50 units |
| Weight Solids(w/w) | 92% ± 2 |
| Electrostatic Response | Ground resistance Rg<106 ohms (IEC 61340-4-1) Average ground resistance 104 ≤ Rg ≤ 106 ohms IEC 61340-4-1 |
| Application Method | Trowel, Brush, Roller |
| Mixture Life (20ºC) | 20-25 min. |
| Full Cure (days/20°C) | 1-7 days |
DRYING INFORMATION (100 micron DFT)
| Touch Dry | Hard Dry | Waiting Times Between Levels (Minimum) | |
|---|---|---|---|
| -5°C | 12 hours | 29-30 hours | 24 hours |
| 0°C | 9 hours | 20-21 hours | 18 hours |
| 5°C | 6 hours | 13-14 hours | 12 hours |
| 15°C | 120-160 min. | 5-6 hours | 3.5 hours |
| 25°C | 80-100 min. | 3-4 hours | 2 hours |
| 35°C | 60-80 min. | 1.5-2 hours | 1.5 hours |
NOTE: As the application thickness increases, the drying time also increases.
| CONSUMPTION Wet Film Thickness (µ) | Dry Film Thickness (µ) | Theoretical Consumption ± 10 (gr/m²) |
|---|---|---|
| 215 | 215 | 300 |
NOTE: As the application thickness increases, the consumption also increases.
Surface Preparation
Free particles and paint residues on the surface should be completely cleaned, cracks and cracks should be repaired, surfaces should be roughened mechanically (blastrak or milling cutter) and cleaned from dust with a vacuum cleaner.
Use of the Product
SOLID ES 351 is used as a condactive epoxy primer of the antistatic floor coating system in industrial floors, production and warehouses, in areas where sensitive electrical and electronic equipment are located and where there is a risk of explosion.
form of application; done with a brush, roller or gun.
Fill out the form to request pricing, application or technical information about this product.
Solid Epoxy Flooring Systems provides durable epoxy flooring products and coating solutions for garages, commercial spaces and industrial facilities.
Strong surfaces. Clean finishes. Long-lasting protection.
We will get back to you as soon as possible.